新的法師設置
本帖最后由 pulaga0488 于 2020-2-14 16:34 编辑這是自kolbot大人走後另一個新團隊接手的檔案
本人稍加翻譯以及針對符文做添加與修改
另外沒翻譯到的是因為小弟才疏學淺有些不明白 歡迎各位大神指教
再來這個版本添加了許多東西還望大神求助詳解
歡迎加入群650385792一起討論
// 法師設置文件
/* Brief instructions:
* Notepad++ is HIGHLY recommended to use for editing these files. Visit http://notepad-plus-plus.org/
* To comment out something, put // in front of that line
* !!!Never comment out something you're not sure about, set it to false or disable as noted in description if you don't want to use it.
* true and false are case sensitive. Good: Config.SomeVar = true; Bad: Config.SomeVar = True;
*/
function LoadConfig() {
/* Sequence config
* Set to true if you want to run it, set to false if not.
* If you want to change the order of the scripts, just change the order of their lines by using cut and paste.
*/
// User addon script. Read the description in libs/bots/UserAddon.js
Scripts.UserAddon = true; // !!!YOU MUST SET THIS TO FALSE IF YOU WANT TO RUN BOSS/AREA SCRIPTS!!!
// Battle orders script - Use this for 2+ characters (for example BO barb + sorc)
Scripts.BattleOrders = false;
Config.BattleOrders.Mode = 0; // 0 = 給 BO, 1 = 取得 BO
Config.BattleOrders.Idle = false; // 空閒直到收到 bo 的玩家離開
Config.BattleOrders.Getters = []; // 等待要取得BO的玩家列表ex:["人物ID"]
Config.BattleOrders.QuitOnFailure = false; // 如果 bo 失敗，則退出遊戲→新添加
Config.BattleOrders.SkipIfTardy = true; // 如果其他玩家已從 bo 點前進，則繼續腳本→新添加
Config.BattleOrders.Wait = 10; // 等待玩家加入遊戲的持續時間 單位:(秒)→新添加
// Team MF system
Config.MFLeader = false; // 組隊MF系統，如需要組隊刷裝或是帶關卡，領導需設置此項為true
// 刷boss (只翻譯大家常刷的，如有其他需要請自行爬文)
// *** act 1 ***
Scripts.Corpsefire = false; // 邪惡洞窟-菁英王-屍體發火
Config.Corpsefire.ClearDen = false; // 是否清除邪惡洞窟
Scripts.Mausoleum = false; // 埋骨之地-大陵寢
Config.Mausoleum.KillBloodRaven = false;// 埋骨之地-血鳥
Config.Mausoleum.ClearCrypt = false; // 埋骨之地-教堂
Scripts.Rakanishu = false; // 石塊礦野-菁英王-拉卡尼休
Config.Rakanishu.KillGriswold = true; // 崔斯特瑞姆-菁英王-格瑞斯
Scripts.UndergroundPassage = false; // 石塊礦野-洞穴
Scripts.Coldcrow = false; // 石塊礦野-洞穴-菁英王-冰冷烏鴉
Scripts.Tristram = false; // 是否清除崔斯特瑞姆
Config.Tristram.WalkClear = false; // 清除時禁用傳送門，保護吸經驗的人
Config.Tristram.PortalLeech = false; // 設置為true，會開門給小號吸經驗
Scripts.Pit = false; // 泰摩高地-地穴(會直奔第二層)
Config.Pit.ClearPit1 = true; // 全清一層
Scripts.Treehead = false; // 黑暗森林-菁英王-樹頭木拳
Scripts.Smith = false; // 軍營-菁英王-鐵匠
Scripts.BoneAsh = false; // 往地下墓穴的門前-菁英王-骨灰
Scripts.Countess = false; // 高塔第五層-菁英王-女伯爵
Config.Countess.KillGhosts = false; // 高塔-菁英鬼魂
Scripts.Andariel = false; // BOSS-安達利爾
Scripts.Cows = false; // 秘密母牛關卡
// *** act 2 ***
Scripts.Radament = false; // 下水道第三層-菁英王-羅達門特
Scripts.Coldworm = false; // 蛆蟲巢穴-菁英王-鑽地的冰蟲
Config.Coldworm.KillBeetleburst = false; // 遙遠的綠洲-菁英王-爆開的甲蟲
Config.Coldworm.ClearMaggotLair = false; // 蛆蟲巢穴(全清)
Scripts.AncientTunnels = false; // 古代通道
Config.AncientTunnels.OpenChest = false; // 開啟遺失城市的特殊寶箱
Config.AncientTunnels.KillDarkElder = false;// 遺失的城市-菁英王-黑暗長老
Scripts.Summoner = false; // 神秘避難所-召換者
Config.Summoner.FireEye = false; // 監牢第三層-菁英王-火眼
Scripts.Tombs = false; // 塔‧拉下古墓(全清)
Scripts.Duriel = false; // BOSS-都瑞爾
// *** act 3 ***
Scripts.Stormtree = false; // 庫拉斯特下層-菁英王-暴風之樹
Scripts.KurastTemples = false; // 庫拉斯特商場-殘酷神殿
Scripts.Icehawk = false; // 庫拉斯特商場-菁英王-裂縫之翼－冰鷹
Scripts.Endugu = false; // 庫拉斯特上層-菁英王-古巫醫－印都
Scripts.Travincal = false; // 崔凡克-議會成員
Config.Travincal.PortalLeech = false; // 開門給BB吸經驗
Scripts.Mephisto = false; // Boss-墨菲斯托
Config.Mephisto.MoatTrick = false; // 會將莫非引到下方隔岸殺王(適用拓荒法師)
Config.Mephisto.KillCouncil = false; // 擊殺兩側議會成員
Config.Mephisto.TakeRedPortal = true; // 通過紅門直接到act4
// *** act 4 ***
Scripts.OuterSteppes = false; // 郊外大草原(全清)
Scripts.Izual = false; // 絕望平原-菁英王-衣卒爾
Scripts.Hephasto = false; // 地獄熔爐菁英王-盔甲製造者海法斯特
Scripts.Vizier = false; // 適用於經典法師-只擊殺渾沌大臣
Scripts.FastDiablo = false; // BOSS-暗黑破壞神(快速刷封印不清，直接叫出暗黑破獲神)
Scripts.Diablo = false; // BOSS-暗黑破壞神
Config.Diablo.WalkClear = false; // 行走方式清怪
Config.Diablo.Entrance = true; // 是否在渾沌避難所開起傳送門
Config.Diablo.SealWarning = "Leave the seals alone!";
Config.Diablo.EntranceTP = "Entrance TP up";
Config.Diablo.StarTP = "Star TP up";
Config.Diablo.DiabloMsg = "Diablo";
Config.Diablo.SealOrder = ["vizier", "seis", "infector"]; // 清除封印順序，可自行修改順序→新添加
Scripts.SealLeader = false; // 清出安全點以讓吸經驗者進入，運行此行時，請不要開啟fastdiablo或是diablo
// *** act 5 ***
Scripts.Pindleskin = false; // 爆燥外皮
Config.Pindleskin.UseWaypoint = false; // 從傳送點進入，若設置為false，則從安亞那邊的紅門進入
Config.Pindleskin.KillNihlathak = true; // 瓦特之廳-菁英王-尼拉塞克
Config.Pindleskin.ViperQuit = false; // 遇到毒蛇停止動作
Scripts.Nihlathak = false; // 瓦特之廳-菁英王-尼拉塞克
Config.Nihlathak.ViperQuit = false; // 遇到毒蛇停止動作.
Scripts.Eldritch = false; // 冰凍高地-菁英王-矯正者-怪異
Config.Eldritch.OpenChest = true; // 開啟冰凍苔原寶箱
Config.Eldritch.KillShenk = true; // 血腥丘陵-菁英王-督軍山克
Config.Eldritch.KillDacFarren = true; // 血腥丘陵-菁英王-達克.法倫
Scripts.Eyeback = false; // 亞瑞特高原-菁英王-狂暴者-眼魔
Scripts.SharpTooth = false; // 亞瑞特高原-菁英王-利牙殺手
Scripts.ThreshSocket = false; // 亞瑞特高原-菁英王-剝殼凹槽
Scripts.Abaddon = false; // 冰凍高地-紅門(全清)
Scripts.Frozenstein = false; // 冰河-冰凍魔怪
Config.Frozenstein.ClearFrozenRiver = true; // 冰河(全清)
Scripts.Bonesaw = false; // 冰凍苔原-菁英王-骨鋸破壞者
Config.Bonesaw.ClearDrifterCavern = false; // 是否清除冰凍苔原
Scripts.Snapchip = false; // 冰河路徑-菁英王-粉碎者
Config.Snapchip.ClearIcyCellar = true; // 冰河路徑(全清)
Scripts.Worldstone = false; // 世界要塞(全清)
Scripts.Baal = false; // BOSS-巴爾
Config.Baal.HotTPMessage = "Hot TP!";
Config.Baal.SafeTPMessage = "Safe TP!";
Config.Baal.BaalMessage = "Baal!";
Config.Baal.SoulQuit = false; // 有靈魂(電魂)則停止動作
Config.Baal.DollQuit = false; // 有不死冥河娃娃則停止動作
Config.Baal.KillBaal = true; // 是否擊殺巴爾
/* ### 吸經驗 ###
* 除非有另外說明，否則運行時不需要領導者名稱
* 不要使用相同類型的代碼，AutoBaal或BaalHelper只能使用一種
*/
Config.Leader = ""; // 領導者的遊戲角色名稱。留空以嘗試自動檢測（可在AutoBaal，Wakka，MFHelper中使用）
Config.QuitList = [""]; // 要退出的字符名稱
Config.QuitListMode = 0; // 0 = 角色名稱; 1 = D2bs視窗名稱 (所有配置文件必須在同一台電腦上運行).
Config.QuitListDelay = []; // 延遲退出的秒數. 範例 Config.QuitListDelay = ; 將會在領到退出後1~10秒內隨機退出.
Scripts.TristramLeech = false; // 進入崔斯特瑞姆並試圖幫助擊殺.
Scripts.TravincalLeech = false; // 從領導發出的安全點進入.
Config.TravincalLeech.Helper = true; // 如果設置為true，則會幫助擊殺
Scripts.MFHelper = false; // 如果設置為true則Config.MFLeader = true(通常是團隊掛裝備使用)
Scripts.Wakka = false; // 與領導者保持距離，避免被大量傷害擊殺(可用於吸經驗者)
Scripts.SealLeecher = false; // 如果設置為true則Scripts.SealLeader = true(給吸經驗者用).
Scripts.DiabloHelper = false; // 幫助擊殺diablo.
Config.DiabloHelper.Wait = 120; // 等待領導者的秒數.
Config.DiabloHelper.Entrance = true; // 是否從渾沌避難所入口幫助擊殺，否則將從星標開始.
Config.DiabloHelper.SkipTP = false; // 不等待傳送門直接進入渾沌避難所.
Config.DiabloHelper.SkipIfBaal = false; // 如果擊殺巴爾時有組隊則停止動作，設置false為禁用.
Config.DiabloHelper.OpenSeals = false; // 幫忙開啟封印
Config.DiabloHelper.SafePrecast = true; // take random WP to safely precast
Config.DiabloHelper.SealOrder = ["vizier", "seis", "infector"]; // 隊員開啟封印順序
Config.DiabloHelper.RecheckSeals = false; // 檢查每個封印是否確實開啟
Scripts.AutoBaal = false; // 隊員自動打巴爾
Config.AutoBaal.FindShrine = false; // false = 禁用, 1 = 領導喊出HOT TP後進傳送門, 2 = 找到領導者後進入傳送門
Config.AutoBaal.LeechSpot = ; // X, Y 毀滅王座吸經驗座標
Config.AutoBaal.LongRangeSupport = false; // 從安全點釋放長距離技能
Scripts.BaalHelper = false; // 幫助擊殺巴爾
Config.BaalHelper.Wait = 120; // 等待行走的人到毀滅王座的秒數
Config.BaalHelper.KillNihlathak = false; // 殺巴爾前殺死尼拉賽克
Config.BaalHelper.FastChaos = false; // 殺巴爾前殺死暗黑破壞神
Config.BaalHelper.DollQuit = false; // 遇到亡靈殺手則停止動作
Config.BaalHelper.KillBaal = true; // 幫助擊殺巴爾，如果設置為false則必須配置Config.QuitList，否則將會無限期等待不會退出.
Config.BaalHelper.SkipTP = false; // 不等待傳送門只接到毀滅王座(反PK措施).
Scripts.Follower = false; // 向傭兵一樣環繞在領導者身邊, 請參閱 Follower.js
// *** special scripts ***
Scripts.WPGetter = false; // 取得遺失的傳送點
Scripts.GetKeys = false; // 取得憎恨之鑰，恐懼之鑰，毀滅之鑰
Scripts.OrgTorch = false;
Config.OrgTorch.MakeTorch = true; // Convert organ sets to torches
Config.OrgTorch.WaitForKeys = true; // Enable Torch System to get keys from other profiles. See libs/TorchSystem.js for more info
Config.OrgTorch.WaitTimeout = 15; // Time in minutes to wait for keys before moving on
Config.OrgTorch.UseSalvation = true; // Use Salvation aura on Mephisto (if possible)
Config.OrgTorch.GetFade = false; // Get fade by standing in a fire. You MUST have Last Wish or Treachery on your character being worn.
Config.OrgTorch.AntidotesToChug = 0; // Chug x antidotes before Lilith. Each antidote gives +50 poison res and +10 max poison for 30 seconds. The duration stacks. 4 potions == 2 minutes
Scripts.Rusher = false; // Rush bot. For a list of commands, see Rusher.js
Config.Rusher.WaitPlayerCount = 0; // Wait until game has a certain number of players (0 - don't wait, 8 - wait for full game).
Config.Rusher.Radament = false; // Do Radament quest.
Config.Rusher.LamEsen = false; // Do Lam Esen quest.
Config.Rusher.Izual = false; // Do Izual quest.
Config.Rusher.Shenk = false; // Do Shenk quest.
Config.Rusher.Anya = false; // Do Anya quest.
Config.Rusher.LastRun = ""; // End rush after this run.
Scripts.Rushee = false; // Automatic rushee, works with Rusher. Set Rusher's character name as Config.Leader
Config.Rushee.Quester = false; // Enter portals and get quest items.
Config.Rushee.Bumper = false; // Do Ancients and Baal. Minimum levels: 20 - norm, 40 - nightmare
Scripts.CrushTele = false; // classic rush teleporter. go to area of interest and press "-" numpad key
Scripts.Questing = false; // solves missing quests (skill/stat+shenk)
Scripts.Gamble = false; // Gambling system, other characters will mule gold into your game so you can gamble infinitely. See Gambling.js
Scripts.Crafting = false; // Crafting system, other characters will mule crafting ingredients. See CraftingSystem.js
Scripts.GhostBusters = false; // Kill ghosts in most areas that contain them
Scripts.Enchant = false;
Config.Enchant.Triggers = ["chant", "cows", "wps"]; // Chat commands for enchant, cow level and waypoint giving
Config.Enchant.GetLeg = false; // Get Wirt's Leg from Tristram. If set to false, it will check for the leg in town.
Config.Enchant.AutoChant = false; // Automatically enchant nearby players and their minions
Config.Enchant.GameLength = 20; // Game length in minutes
Scripts.IPHunter = false;
Config.IPHunter.IPList = []; // List of IPs to look for. example:
Config.IPHunter.GameLength = 3; // Number of minutes to stay in game if ip wasn't found
Scripts.KillDclone = false; // Kill Diablo Clone by using Arcane Sanctuary waypoint. Diablo needs to walk the Earth in the game.
Scripts.ShopBot = false; // Shopbot script. Automatically uses shopbot.nip and ignores other pickits.
// Supported NPCs: Akara, Charsi, Gheed, Elzix, Fara, Drognan, Ormus, Asheara, Hratli, Jamella, Halbu, Anya. Multiple NPCs are also supported, example:
// Use common sense when combining NPCs. Shopping in different acts will probably lead to bugs.
Config.ShopBot.ShopNPC = NPC.Anya;
// Put item classid numbers or names to scan (remember to put quotes around names). Leave blank to scan ALL items. See libs/config/templates/ShopBot.txt
Config.ShopBot.ScanIDs = [];
Config.ShopBot.CycleDelay = 0; // Delay between shopping cycles in milliseconds, might help with crashes.
Config.ShopBot.QuitOnMatch = false; // Leave game as soon as an item is shopped.
Scripts.ChestMania = false; // Open chests in configured areas. See sdk/areas.txt
Config.ChestMania.Act1 = ; // List of act 1 areas to open chests in
Config.ChestMania.Act2 = ; // List of act 2 areas to open chests in
Config.ChestMania.Act3 = ; // List of act 3 areas to open chests in
Config.ChestMania.Act4 = []; // List of act 4 areas to open chests in
Config.ChestMania.Act5 = ; // List of act 5 areas to open chests in
Scripts.ClearAnyArea = false; // Clear any area. Uses Config.ClearType to determine which type of monsters to kill.
Config.ClearAnyArea.AreaList = []; // List of area ids to clear. See sdk/areas.txt
// *** Guest scripts ***
// Baal Assistant by YourGreatestMember
Scripts.BaalAssistant = false; // Used to leech or help in baal runs.
Config.BaalAssistant.Wait = 120; // Seconds to wait for a runner to be in the throne / portal wait / safe TP wait / hot TP wait...
Config.BaalAssistant.KillNihlathak = false; // Kill Nihlathak before going to Throne
Config.BaalAssistant.FastChaos = false; // Kill Diablo before going to Throne
Config.BaalAssistant.Helper = true; // Set to true to help attack, set false to to leech.
Config.BaalAssistant.GetShrine = false; // Set to true to get a experience shrine at the start of the run.
Config.BaalAssistant.GetShrineWaitForHotTP = false; // Set to true to get a experience shrine after leader shouts the hot tp message as defined in Config.BaalAssistant.HotTPMessage
Config.BaalAssistant.SkipTP = false; // Set to true to enable the helper to skip the TP and teleport down to the throne room.
Config.BaalAssistant.WaitForSafeTP = false; // Set to true to wait for a safe TP message (defined in SafeTPMessage)
Config.BaalAssistant.DollQuit = false; // Quit on dolls. (Hardcore players?)
Config.BaalAssistant.SoulQuit = false; // Quit on Souls. (Hardcore players?)
Config.BaalAssistant.KillBaal = true; // Set to true to kill baal, if you set to false you MUST configure Config.QuitList or Config.BaalAssistant.NextGameMessage or the bot will wait indefinitely.
Config.BaalAssistant.HotTPMessage = ["Hot"]; // Configure safe TP messages.
Config.BaalAssistant.SafeTPMessage = ["Safe", "Clear"]; // Configure safe TP messages.
Config.BaalAssistant.BaalMessage = ["Baal"]; // Configure baal messages, this is a precautionary measure.
Config.BaalAssistant.NextGameMessage = ["Next Game", "Next", "New Game"]; // Next Game message, this is a precautionary quit command, Reccomended setting up: Config.QuitList
// Town settings
Config.HealHP = 50; // Go to a healer if under designated percent of life.
Config.HealMP = 0; // Go to a healer if under designated percent of mana.
Config.HealStatus = false; // Go to a healer if poisoned or cursed
Config.UseMerc = true; // Use merc. This is ignored and always false in d2classic.
Config.MercWatch = false; // Instant merc revive during battle.
// Potion settings
Config.UseHP = 75; // Drink a healing potion if life is under designated percent.
Config.UseRejuvHP = 40; // Drink a rejuvenation potion if life is under designated percent.
Config.UseMP = 30; // Drink a mana potion if mana is under designated percent.
Config.UseRejuvMP = 0; // Drink a rejuvenation potion if mana is under designated percent.
Config.UseMercHP = 75; // Give a healing potion to your merc if his/her life is under designated percent.
Config.UseMercRejuv = 0; // Give a rejuvenation potion to your merc if his/her life is under designated percent.
Config.HPBuffer = 0; // Number of healing potions to keep in inventory.
Config.MPBuffer = 0; // Number of mana potions to keep in inventory.
Config.RejuvBuffer = 0; // Number of rejuvenation potions to keep in inventory.
// Chicken settings
Config.LifeChicken = 30; // Exit game if life is less or equal to designated percent.
Config.ManaChicken = 0; // Exit game if mana is less or equal to designated percent.
Config.MercChicken = 0; // Exit game if merc's life is less or equal to designated percent.
Config.TownHP = 0; // Go to town if life is under designated percent.
Config.TownMP = 0; // Go to town if mana is under designated percent.
/* Inventory lock configuration. !!!READ CAREFULLY!!!
* 0 = item is locked and won't be moved. If item occupies more than one slot, ALL of those slots must be set to 0 to lock it in place.
* Put 0s where your torch, annihilus and everything else you want to KEEP is.
* 1 = item is unlocked and will be dropped, stashed or sold.
* If you don't change the default values, the bot won't stash items.
*/
Config.Inventory = ;
Config.Inventory = ;
Config.Inventory = ;
Config.Inventory = ;
Config.StashGold = 100000; // 金錢進倉最低金額.
/* 藥水設置由左到右.
* Rejuvenation potions must always be rightmost.
* 補血("hp"), 法力 ("mp") 活力 ("rv")
*/
Config.BeltColumn = "hp";
Config.BeltColumn = "mp";
Config.BeltColumn = "rv";
Config.BeltColumn = "rv";
/* 腰帶藥水數量設置，由左到右.*/
Config.MinColumn = 3;
Config.MinColumn = 3;
Config.MinColumn = 0;
Config.MinColumn = 0;
// 拾取文件設置. 請參閱 kolbot/pickit.
Config.PickitFiles.push("kolton.nip");
Config.PickitFiles.push("LLD.nip");
Config.PickRange = 40; // 拾取半徑
Config.FastPick = false; // 快速拾取(在戰鬥中並檢查時取項目)
/* Advanced automule settings
* Trigger - Having an item that is on the list will initiate muling. Useful if you want to mule something immediately upon finding.
* Force - Items listed here will be muled even if they are ingredients for cubing.
* Exclude - Items listed here will be ignored and will not be muled. Items on Trigger or Force lists are prioritized over this list.
*
* List can either be set as string in pickit format and/or as number referring to item classids. Each entries are separated by commas.
* Example :
*Config.AutoMule.Trigger = == ring && == unique # == 20"];
* This will initiate muling when your character finds Ber, Jah, or SOJ.
*Config.AutoMule.Force = ;
* This will mule perfect gems/skull during muling.
*Config.AutoMule.Exclude = [" >= talrune && <= solrune", " >= 654 && <= 657"];
* This will exclude muling of runes from tal through sol, and any essences.
*/
Config.AutoMule.Trigger = [];
Config.AutoMule.Force = [];
Config.AutoMule.Exclude = [];
// Additional item info log settings. All info goes to \logs\ItemLog.txt
Config.ItemInfo = false; // Log stashed, skipped (due to no space) or sold items.
Config.ItemInfoQuality = []; // The quality of sold items to log. See NTItemAlias.dbl for values. Example: Config.ItemInfoQuality = ;
// Item identification settings
Config.CainID.Enable = false; // Identify items at Cain
Config.CainID.MinGold = 2500000; // Minimum gold (stash + character) to have in order to use Cain.
Config.CainID.MinUnids = 3; // Minimum number of unid items in order to use Cain.
Config.FieldID = false; // Identify items in the field instead of going to town.
Config.DroppedItemsAnnounce.Enable = false; // Announce Dropped Items to in-game newbs
Config.DroppedItemsAnnounce.Quality = []; // Quality of item to announce. See NTItemAlias.dbl for values. Example: Config.DroppedItemsAnnounce.Quality = ;
// Manager Item Log Screen
Config.LogKeys = false; // Log keys on item viewer
Config.LogOrgans = true; // Log organs on item viewer
Config.LogLowRunes = false; // Log low runes (El - Dol) on item viewer
Config.LogMiddleRunes = false; // Log middle runes (Hel - Mal) on item viewer
Config.LogHighRunes = true; // Log high runes (Ist - Zod) on item viewer
Config.LogLowGems = false; // Log low gems (chipped, flawed, normal) on item viewer
Config.LogHighGems = false; // Log high gems (flawless, perfect) on item viewer
Config.SkipLogging = []; // Custom log skip list. Set as three digit item code or classid. Example: ["tes", "ceh", 656, 657] will ignore logging of essences.
Config.ShowCubingInfo = true; // Show cubing messages on console
// Repair settings
Config.CubeRepair = false; // Repair weapons with Ort and armor with Ral rune. Don't use it if you don't understand the risk of losing items.
Config.RepairPercent = 40; // Durability percent of any equipped item that will trigger repairs.
// Gambling config
Config.Gamble = false;
Config.GambleGoldStart = 1000000;
Config.GambleGoldStop = 500000;
// List of item names or classids for gambling. Check libs/NTItemAlias.dbl file for other item classids.
Config.GambleItems.push("Amulet");
Config.GambleItems.push("Ring");
Config.GambleItems.push("Circlet");
Config.GambleItems.push("Coronet");
/* Cubing config. All recipe names are available in Templates/Cubing.txt. For item names/classids check NTItemAlias.dbl
* The format is Config.Recipes.push(). Etherealness is optional and only applies to some recipes.
*/
Config.Cubing = false; // 赫拉迪克方塊合成系統
// Ingredients for the following recipes will be auto-picked, for classids check libs/NTItemAlias.dbl
//Config.Recipes.push(); // Make Perfect Amethyst
//Config.Recipes.push(); // Make Perfect Topaz
//Config.Recipes.push(); // Make Perfect Sapphire
//Config.Recipes.push(); // Make Perfect Emerald
//Config.Recipes.push(); // Make Perfect Ruby
//Config.Recipes.push(); // Make Perfect Diamond
//Config.Recipes.push(); // Make Perfect Skull
//Config.Recipes.push(); // Make Token of Absolution
//Config.Recipes.push(); // 升級到 2 號 艾德
//Config.Recipes.push(); // 升級到 3 號 特爾
//Config.Recipes.push(); // 升級到 4 號 那夫
//Config.Recipes.push(); // 升級到 5 號 愛斯
//Config.Recipes.push(); // 升級到 6 號 伊司
//Config.Recipes.push(); // 升級到 7 號 塔爾
//Config.Recipes.push(); // 升級到 8 號 拉爾
//Config.Recipes.push(); // 升級到 9 號 歐特
//Config.Recipes.push(); // 升級到 10 號 書爾
//Config.Recipes.push(); // 升級到 11 號 安姆
//Config.Recipes.push(); // 升級到 12 號 索爾
//Config.Recipes.push(); // 升級到 13 號 Shael
//Config.Recipes.push(); // 升級到 14 號 多爾
//Config.Recipes.push(); // 升級到 15 號 海爾
Config.Recipes.push(); // 升級到 16 號 Io
Config.Recipes.push(); // 升級到 17 號 盧姆
Config.Recipes.push(); // 升級到 18 號 科
Config.Recipes.push(); // 升級到 19 號 法爾
Config.Recipes.push(); // 升級到 20 號 藍姆
Config.Recipes.push(); // 升級到 21 號 普爾
Config.Recipes.push(); //升級到 22 號 烏姆
Config.Recipes.push(); //升級到 23 號 馬爾
Config.Recipes.push(); //升級到 24 號 伊斯特
Config.Recipes.push(); //升級到 25 號 古爾
Config.Recipes.push(); //升級到 26 號 伐克斯
Config.Recipes.push(); // 升級到 27 號 歐姆
Config.Recipes.push(); // 升級到 28 號 羅
Config.Recipes.push(); // 升級到 29 號 瑟
Config.Recipes.push(); // 升級到 30 號 貝
Config.Recipes.push(); // 升級到 31 號 喬
Config.Recipes.push(); // 升級到 32 號 查姆
Config.Recipes.push(); // 升級到 33 號 薩德
// 獨特暗金裝備升級
//Config.Recipes.push(); // Craft Caster Amulet
//Config.Recipes.push(); // Craft Blood Ring
//Config.Recipes.push(); // Craft Blood Armet
//Config.Recipes.push(); // Craft Hit Power Vambraces
// 手工藝裝備製作
//Config.Recipes.push(); // Reroll magic Diadem
//Config.Recipes.push(); // Reroll magic Grand Charm (ilvl 91+)
//Config.Recipes.push(); // Reroll rare Diadem
// 自動打洞
//Config.Recipes.push(); // Socket ethereal Thresher
//Config.Recipes.push(); // Socket ethereal Cryptic Axe
//Config.Recipes.push(); // Socket ethereal Sacred Armor
//Config.Recipes.push(); // Socket ethereal Archon Plate
//Config.Recipes.push(); // Upgrade Bloodfist to Exceptional
//Config.Recipes.push(); // Upgrade Magefist to Exceptional
//Config.Recipes.push(); // Upgrade Bloodfist or Grave Palm to Elite
//Config.Recipes.push(); // Upgrade Magefist or Lavagout to Elite
//Config.Recipes.push(); // Upgrade Gore Rider to Elite
/* Runeword config. All recipes are available in Templates/Runewords.txt
* Keep lines follow pickit format and any given runeword is tested vs ALL lines so you don't need to repeat them
*/
Config.MakeRunewords = false; // 符文組製作系統
//Config.Runewords.push(); // Make ethereal Insight Thresher
//Config.Runewords.push(); // Make ethereal Insight Cryptic Axe
//Config.KeepRunewords.push(" == polearm # == 17");
//Config.Runewords.push(); // Make Spirit Monarch
//Config.Runewords.push(); // Make Spirit Sacred Targe
//Config.KeepRunewords.push(" == shield || == auricshields # == 35");
// Public game options
// If LocalChat is enabled, chat can be sent via 'sendCopyData' instead of BNET
// To allow 'say' to use BNET, use 'say("msg", true)', the 2nd parameter will force BNET
// LocalChat messages will only be visible on clients running on the same PC
Config.LocalChat.Enabled = false; // enable the LocalChat system
Config.LocalChat.Toggle = false; // optional, set to KEY value to toggle through modes 0, 1, 2
Config.LocalChat.Mode = 0; // 0 = disabled, 1 = chat from 'say' (recommended), 2 = all chat (for manual play)
// If Config.Leader is set, the bot will only accept invites from leader. If Config.PublicMode is not 0, Baal and Diablo script will open Town Portals.
// 組隊系統
Config.PublicMode = 0; // 1 = 邀請和接受組隊, 2 = 僅接受, 3 = 僅邀請, 0 = 禁用
// Party message settings. Each setting represents an array of messages that will be randomly chosen.
// $name, $level, $class and $killer are replaced by the player's name, level, class and killer
Config.Greetings = []; // Example: ["Hello, $name (level $level $class)"]
Config.DeathMessages = []; // Example: ["Watch out for that $killer, $name!"]
Config.Congratulations = []; // Example: ["Congrats on level $level, $name!"]
Config.ShitList = false; // Blacklist hostile players so they don't get invited to party.
Config.UnpartyShitlisted = false; // Leave party if someone invited a blacklisted player.
// General config
Config.AutoMap = false; // Set to true to open automap at the beginning of the game.
Config.LastMessage = ""; // Message or array of messages to say at the end of the run. Use $nextgame to say next game - "Next game: $nextgame" (works with lead entry point)
Config.MinGameTime = 60; // Min game time in seconds. Bot will TP to town and stay in game if the run is completed before.
Config.MaxGameTime = 0; // Maximum game time in seconds. Quit game when limit is reached.
Config.TeleSwitch = false; // Switch to secondary (non-primary) slot when teleporting more than 5 nodes.
Config.OpenChests = false; // Open chests. Controls key buying.
Config.MiniShopBot = true; // Scan items in NPC shops.
Config.PacketShopping = false; // Use packets to shop. Improves shopping speed.
Config.TownCheck = false; // Go to town if out of potions
Config.LogExperience = false; // Print experience statistics in the manager.
Config.PingQuit = [{Ping: 0, Duration: 0}]; // Quit if ping is over the given value for over the given time period in seconds.
Config.Silence = false; // Make the bot not say a word. Do not use in combination with LocalChat
// Shrine Scanner - scan for shrines while moving.
// Put the shrine types in order of priority (from highest to lowest). For a list of types, see sdk/shrines.txt
Config.ScanShrines = [];
// MF Switch
Config.MFSwitchPercent = 0; // Boss life % to switch to non-primary weapon slot. Set to 0 to disable.
// Primary Slot - Bot will try to determine primary slot if not used (non-cta slot that's not empty)
Config.PrimarySlot = -1; // Set to use specific weapon slot as primary weapon slot: -1 = disabled, 0 = slot I, 1 = slot II
// Fastmod config
Config.FCR = 0; // 0 - disable, 1 to 255 - set value of faster cast rate
Config.FHR = 0; // 0 - disable, 1 to 255 - set value of faster hit recovery
Config.FBR = 0; // 0 - disable, 1 to 255 - set value of faster block recovery
Config.IAS = 0; // 0 - disable, 1 to 255 - set value of increased attack speed
Config.PacketCasting = 0; // 0 = disable, 1 = packet teleport, 2 = full packet casting.
Config.WaypointMenu = true;
// Anti-hostile config
Config.AntiHostile = false; // Enable anti-hostile
Config.HostileAction = 0; // 0 - quit immediately, 1 - quit when hostile player is sighted, 2 - attack hostile
Config.TownOnHostile = false; // Go to town instead of quitting when HostileAction is 0 or 1
Config.RandomPrecast = false; // Anti-PK measure, only supported in Baal and BaalHelper and BaalAssisstant at the moment.
Config.ViperCheck = false; // Quit if revived Tomb Vipers are sighted
// DClone config
Config.StopOnDClone = true; // Go to town and idle as soon as Diablo walks the Earth
Config.SoJWaitTime = 5; // Time in minutes to wait for another SoJ sale before leaving game. 0 = disabled
Config.KillDclone = false; // Go to Palace Cellar 3 and try to kill Diablo Clone. Pointless if you already have Annihilus.
Config.DCloneQuit = false; // 1 = quit when Diablo walks, 2 = quit on soj sales, 0 = disabled
// Monster skip config
// Skip immune monsters. Possible options: "fire", "cold", "lightning", "poison", "physical", "magic".
// You can combine multiple resists with "and", for example - "fire and cold", "physical and cold and poison"
Config.SkipImmune = [];
// Skip enchanted monsters. Possible options: "extra strong", "extra fast", "cursed", "magic resistant", "fire enchanted", "lightning enchanted", "cold enchanted", "mana burn", "teleportation", "spectral hit", "stone skin", "multiple shots".
// You can combine multiple enchantments with "and", for example - "cursed and extra fast", "mana burn and extra strong and lightning enchanted"
Config.SkipEnchant = [];
// Skip monsters with auras. Possible options: "fanaticism", "might", "holy fire", "blessed aim", "holy freeze", "holy shock". Conviction is bugged, don't use it.
Config.SkipAura = [];
// Uncomment the following line to always attempt to kill these bosses despite immunities and mods
//Config.SkipException = ; // vizier, de seis, infector
/* Attack config
* To disable an attack, set it to -1
* Skills MUST be POSITIVE numbers. For reference see ...\kolbot\sdk\skills.txt
*/
Config.AttackSkill = -1; // Preattack skill.
Config.AttackSkill = -1; // Primary skill to bosses.
Config.AttackSkill = -1; // Primary untimed skill to bosses. Keep at -1 if Config.AttackSkill is untimed skill.
Config.AttackSkill = -1; // Primary skill to others.
Config.AttackSkill = -1; // Primary untimed skill to others. Keep at -1 if Config.AttackSkill is untimed skill.
Config.AttackSkill = -1; // Secondary skill if monster is immune to primary.
Config.AttackSkill = -1; // Secondary untimed skill if monster is immune to primary untimed.
// Low mana skills - these will be used if main skills can't be cast.
Config.LowManaSkill = -1; // Timed low mana skill.
Config.LowManaSkill = -1; // Untimed low mana skill.
/* Advanced Attack config. Allows custom skills to be used on custom monsters.
* Format: "Monster Name":
* Example: "Baal": to use charged bolt on Baal
* Multiple entries are separated by commas
*/
Config.CustomAttack = {
//"Monster Name": [-1, -1]
};
Config.NoTele = false; // Restrict char from teleporting. Useful for low level/low mana chars
Config.Dodge = false; // Move away from monsters that get too close. Don't use with short-ranged attacks like Poison Dagger.
Config.DodgeRange = 15; // Distance to keep from monsters.
Config.DodgeHP = 100; // Dodge only if HP percent is less than or equal to Config.DodgeHP. 100 = always dodge.
Config.BossPriority = false; // Set to true to attack Unique/SuperUnique monsters first when clearing
Config.ClearType = 0xF; // Monster spectype to kill in level clear scripts (ie. Mausoleum). 0xF = skip normal, 0x7 = champions/bosses, 0 = all
Config.TeleStomp = false; // Use merc to attack bosses if they're immune to attacks, but not to physical damage
// Clear while traveling during bot scripts
// You have two methods to configure clearing. First is simply a spectype to always clear, in any area, with a default range of 30
// The second method allows you to specify the areas in which to clear while traveling, a range, and a spectype. If area is excluded from this method,
// all areas will be cleared using the specified range and spectype
// Config.ClearPath = 0; // Monster spectype to kill while traveling. 0xF = skip normal, 0x7 = champions/bosses, 0 = all
// Config.ClearPath = {
// Areas: , // Specific areas to clear while traveling in. Comment out to clear in all areas
// Range: 30, // Range to clear while traveling
// Spectype: 0, // Monster spectype to kill while traveling. 0xF = skip normal, 0x7 = champions/bosses, 0 = all
// };
// Wereform setup. Make sure you read Templates/Attacks.txt for attack skill format.
Config.Wereform = false; // 0 / false - don't shapeshift, 1 / "Werewolf" - change to werewolf, 2 / "Werebear" - change to werebear
// Class specific config
Config.CastStatic = 60; // Cast static until the target is at designated life percent. 100 = disabled.
Config.StaticList = []; // List of monster NAMES or CLASSIDS to static. Example: Config.StaticList = ["Andariel", 243];
/* AutoSkill builds character based on array defined by the user and it replaces AutoBuild's skill system.
* AutoSkill will automatically spend skill points and it can also allocate any prerequisite skills as required.
*
* Format: Config.AutoSkill.Build = [, , ... ];
* skill - skill id number (see /sdk/skills.txt)
* count - maximum number of skill points to allocate for that skill
* satisfy - boolean value to stop(true) or continue(false) further allocation until count is met. Defaults to true if not specified.
*
* See libs/config/Templates/AutoSkillExampleBuilds.txt for Config.AutoSkill.Build examples.
*/
Config.AutoSkill.Enabled = false; // Enable or disable AutoSkill system
Config.AutoSkill.Save = 0; // Number of skill points that will not be spent and saved
Config.AutoSkill.Build = [];
/* AutoStat builds character based on array defined by the user and this will replace AutoBuild's stat system.
* AutoStat will stat Build array order. You may want to stat strength or dexterity first to meet item requirements.
*
* Format: Config.AutoStat.Build = [, , ... ];
* statType - defined as string, or as corresponding stat integer. "strength" or 0, "dexterity" or 2, "vitality" or 3, "energy" or 1
* stat - set to an integer value, and it will spend stat points until it reaches desired *hard stat value (*+stats from items are ignored).
* You can also set stat to string value "all", and it will spend all the remaining points.
* Dexterity can be set to "block" and it will stat dexterity up the the desired block value specified in arguemnt (ignored in classic).
*
* See libs/config/Templates/AutoStatExampleBuilds.txt for Config.AutoStat.Build examples.
*/
Config.AutoStat.Enabled = false; // Enable or disable AutoStat system
Config.AutoStat.Save = 0; // Number stat points that will not be spent and saved.
Config.AutoStat.BlockChance = 0; // An integer value set to desired block chance. This is ignored in classic.
Config.AutoStat.UseBulk = true; // Set true to spend multiple stat points at once (up to 100), or false to spend singe point at a time.
Config.AutoStat.Build = [];
// AutoBuild System ( See /d2bs/kolbot/libs/config/Builds/README.txt for instructions )
Config.AutoBuild.Enabled = false; // This will enable or disable the AutoBuild system
Config.AutoBuild.Template = "BuildName"; // The name of the build associated with an existing
// template filename located in libs/config/Builds/
Config.AutoBuild.Verbose = true; // Allows script to print messages in console
Config.AutoBuild.DebugMode = true; // Debug mode prints a little more information to console and
// logs activity to /logs/AutoBuild.CharacterName._MM_DD_YYYY.log
// It automatically enables Config.AutoBuild.Verbose
}
好Ｊ 谢谢分享，有中文就是好
页:
[1]